quantum energy generator Archives - HopeGirl Blog

Campaign to Finish the QEG

hopegirl — Sun, 11 Feb 2018 16:03:19 +0000

[et_pb_section bb_built=”1″][et_pb_row][et_pb_column type=”4_4″][et_pb_text]

Hello everyone I am very happy to tell you that we have figured out how to finish the QEG. Recently we’ve discovered new information that we believe is the thing we’ve been missing and we have come up with a plan that we would like to share with all of you!

We have outlined the plan in detail and have also provided a lot of technical information and analysis to support our solution at the link below.

We have just launched a small crowdfunding campaign to help us finish the project so that we can get all the QEG’s around the world to come online. We hope you will consider helping us to make this happen.

ABOUT

This project is to build an electrical generator that is based on the technology of Nikola Tesla. The generator is more efficient than other generators that exist today and can be used in combination with solar or wind power to allow for off grid living. The generator design will be open sourced to allow for others to replicate the design for their own use. Also, the intent is to allow that these devices to be built and distributed through local communities through independent small business start-ups.

HISTORY

This project consists of two devices called a Quantum Energy Generator (QEG) and a miniature version of a QEG. The larger QEG has the potential to supply power on a larger scale, such as providing lighting for a small village. The mini QEG has the potential to supply power on a smaller scale, such as providing power for appliances in off grid situations. This project has been in development for 4 years and both prototypes have already been built. Recently new information has been provided that will allow for the completion of both prototypes. This campaign is intended to raise the funds necessary to complete both devices.

THE PLAN

A new circuit necessary to complete the project needs to be built and tested. This testing will be done on the mini QEG. The reason for this is that the mini-QEG has been designed to allow for faster and cheaper experimentation for testing and tuning the circuit. Should any mistakes occur on the mini QEG during this testing, they will be much easier to correct until the right set up is discovered for the circuit. Once this is done, then the solution can be upscaled and applied to the large QEG. The large QEG open sourced materials will be updated with the solution. A build manual and CAD package will be written and offered for the mini-QEG after testing. This information will be open sourced to allow for anyone to build their own.

To implement this plan, we are raising money to build a new circuit, and to transport the mini-QEG which has been sitting in storage in China to our lab in Morocco. Once the campaign is funded, the project should take a few months to complete. Please see projected project timeline below.

PROJECT TIMELINE
2/10/2018 Beginning of kickstart funding campaign
2/24/2018 End of kickstart funding campaign
2/24/2018- 2/28/2018 Invoice / charge cards to collect pledges (or sooner if project is funded sooner)
3/01/2018- 4/01/2018 Ordering parts and transporting mini QEG
4/01/2018- 4/15/2018 testing mini QEG and reporting results
4/15/2018-5/1/2018 writing the build manual for mini-QEG and updated circuit information for big QEG

ABOUT THE CIRCUIT

The new information regarding the circuit that needs to be designed, built and tested has been analyzed and explained technically in a full presentation. This presentation is available to anyone for a donation of $10 and can be purchased for instant download at this link. It is called “QEG BlackBox Analysis Archive Package”. The footage shows a working QEG model that is self looping and explains the circuit needed to achieve this.

Click here to get the QEG Black Box Analysis Archive

ABOUT THE RESEARCH AND DEVELOPMENT

Research and development for these projects has been ongoing with many various teams around the world since 2014. All related testing and analysis information for this project has been preserved in an online platform called the Clean Energy Academy. Here you will find past archives of project videos, classes, reports and schematics for the project. The Academy also hosts live calls for various presentations, key note speakers and live Q&A. These calls are included with Academy memberships but are also open to non-members who wish to attend via a one time donation. These calls are held twice a month via zoom and the archives are available to purchase.

QEG TECHNICAL SYSTEM DESCRIPTION

The Quantum Energy Generator system (QEG) is an adaptation of one of Nikola Tesla’s many patented electrical generator / dynamo / alternator designs. The particular patent referenced is No. 511,916, titled simply “Electric Generator”, and dated January 2, 1894. The adaptation is a conversion from a linear generating system with a reciprocating rod whose period is electrically regulated, to a rotary generating system.

The QEG prototype is scaled to produce electrical power in the range of 10‐15 kW (kilowatts) continuously, and can be set up to provide either 120 Volt or 230‐240 Volt, 50‐60Hz single phase AC output.

Service life of the device is limited only by certain replaceable components, such as bearings, v‐belts, and capacitors. The basic machine should operate trouble‐free (with minimal maintenance) for as long as any good quality electro‐mechanical appliance, such as a quality washing machine or refrigerator. Heavy‐duty mechanical components are used throughout for reliability.

An effective way to understand the operating principle of the QEG is to think of it as a self‐excited toroidal transformer with high‐voltage primary, and low voltage secondary. The primary high voltage is self‐generated through mechanically pumped parametric resonance. The resonance occurs as a function of the spinning rotor modulating the reluctance/inductance in the primary tank circuit windings. This modulation initiates an oscillation which can develop up to 20,000 volts (20kV) or more in amplitude, with frequency determined by the tank capacitor value and inductance value in the primary windings.

Power is then transferred to the secondary windings during the intervals where the rotor is between pole pieces (unaligned). In today’s alternative energy terminology, it would be called a type of resonance machine.

MINI QEG TECHNICAL DESCRIPTION

The mini QEG prototype is called the “TeslaGen”. It is a high voltage, six-pole, resonant generator, that is easy to repair and modify, and is capable of powering loads between 700w-900w (conservative). Driven by a DC motor, this efficient, portable generator can provide electricity offgrid, or during outages and natural disasters. With further development, this generator has the potential to power itself. The construction is a simple, yet rugged combination of high strength plastic frame and support rods, and is made using widely available parts and fittings. All parts of this reluctance generator is CNC manufactured, and the Computer Aided Design files for these parts will be made available online through this project. This Tesla-inspired technology is scalable and can be reconfigured to suit the power application of the developer. You will be able to swap rotors and coil windings.

ABOUT THIS CAMPAIGN

This is a campaign to complete the project of developing a prototype so that plans for building can be open sourced. This is not a store to buy or sell manufactured QEG’s. This is an “All or Nothing” campaign. Backers for this project will pledge a certain amount by filling out a simple form. No credit card details will be collected at this time. Once there are enough pledgers to fully fund the campaign, a notice will be sent out to all backers with a Paypal Invoice for them to pay with a credit card in the amount that they pledged. No one will be charged or invoiced for a pledge unless the campaign reaches its funding goal. This way, we can ensure that we have the budget we need to successfully implement the project.

Rewards or perks are our chance to share a piece of this project with our backers. We have created several different reward levels below.

Pledge Amounts from $0-$99 does not include a reward.

$100 Pledge
Get a copy of the mini-QEG build manual (when it is complete)
Get a copy of the updated QEG build manual with new circuit design (when it is complete)
Get a download copy of the mini-QEG CAD files

Estimated Perk Delivery Date: May 1 2018

$300 Pledge
Get everything included in the $100 Pledge PLUS
One Year Gold Membership to the Clean Energy Academy includes access to all archives, forums and live calls.

Estimated Perk Delivery Date: May 1 2018
Access to Academy membership is immediate

$1,000 Pledge
Get everything included in the $300 Pledge PLUS
A Beginners Build Class Digital Download Package for the large QEG
(Over 15 hours of instructional video, eBook, QEG CAD package, Bonus Materials)

Estimated Perk Delivery Date: May 1 2018
Access to Academy membership is immediate

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section bb_built=”1″ _builder_version=”3.0.93″][et_pb_row _builder_version=”3.0.93″][et_pb_column type=”4_4″][et_pb_comments _builder_version=”3.0.93″ background_color=”#ffffff” /][/et_pb_column][/et_pb_row][/et_pb_section]

The post Campaign to Finish the QEG appeared first on HopeGirl Blog.

We Now Know How To Finish The QEG PUBLIC ANNOUNCEMENT

hopegirl — Sat, 10 Feb 2018 15:22:07 +0000

WATCH A VIDEO OF THIS ANNOUNCMENT HERE:
WE KNOW HOW TO FINISH THE QEG PUBLIC ANNOUNCEMENT from Hope Moore on Vimeo.

Just in case you are new to this project, our family has been working on developing an open sourced electric generator based on a design of Nikola Tesla. This generator is portable and more efficient than any other generator out there and is designed to help you live off the grid and also can be of great use in natural disasters and major power outages. This generator has been in development with many other teams around the world over the last few years and It was only recently that we discovered this new information on how to finish this project.

So here is our plan in a nutshell. We need to design a new circuit and test that new circuit on the mini QEG. This new circuit is the key to making the QEG work. We are running a small crowdfunding campaign to raise the $5,000 needed to finish this project. This funding will go towards designing the new circuit, and testing it on the mini-QEG first and then after testing, applying it to the big QEG design. The plans for the mini QEG complete with this new circuit will be open sourced. The plans for the big QEG will be updated with the new circuit design also open sourced. All QEG’s that have been built will be able to finish and come online in various locations around the world.

We just did an in depth presentation explaining this circuit in technological detail and explained the circuit by showing it on a working QEG. If you are interested in this level of detail to our solution you can download the full archive package here.

Click here to get the QEG Black Box Analysis Archive

At this point in time, anyone who can understand how to build this circuit and already has a QEG could be able to apply this immediately to finish this project on their own. However, we would like to be given the opportunity to properly design the circuit, test it safely on both devices and construct the proper manual for open sourcing. We’ve brought it this far, we’d like to play a role in finishing it and we only need about $5,000 and a couple of months to do so. So we are asking for any backers that can help us reach this goal. We are running our campaign a little differently this time, its a “Kickstarter All or Nothing” style campaign. We are asking for pledges in any amount, and we have some rewards in larger amounts that include a membership to our academy, CAD packages, instruction classes and the first copy of the mini QEG build manual when it is written, just to name a few. So be sure to visit our campaign and please help us spread the word by sharing it!

PLEASE CLICK HERE TO BACK OUR CAMPAIGN TO FINISH THE QEG

To help spread awareness about this important energy project, we have also just released a new documentary film called “Chasing Tesla”. This short film tells the story about one families quest to replicate a Tesla Invention. It describes this unique form of electricity generation and how it is done and also tells the history behind this invention tracing it all the way back to its origins with Nikola Tesla. The film is available to watch on Vimeo, Youtube and also via Instant Download from Vimeo for free.

CLICK HERE TO WATCH THE MOVIE CHASING TESLA

Other than this, I encourage everyone who is interested in this project and type of work to please become an active member of our academy as we have 4 years worth of research and archive materials available there as well as bi-weekly live academy calls covering a variety of clean energy topics including updates on the QEG project as well as exciting guest speakers in the field.

And finally, our family will be doing something we are calling a “Technology Tithe”. We are calling on all churches to sign up to receive a donated copy of the plans and CAD packages so that their church and community will have the ability to build this generator. This would be especially great for church groups that are involved in missions and charity work with people in remote areas that need access to renewable energy sources. The very heart of this project is to get power access to the people that need it the most, and we feel moved to ask the churches to help us get this out to the world. This project being open sourced, also serves as a great opportunity for small business development in local communities revolving around the production and distribution of these devices.

CLICK HERE TO SIGN UP YOUR CHURCH FOR THE TECHNOLOGY TITHE

So if you know someone in your church that has basic electrical and shop skills that might be interested in receiving the plans for this project, we have a sign up form just for the technology tithe and we will also be scheduling meet and greet zoom calls with church leaders and electricians so we can answer any questions you might have.

And that’s it for now everyone, please find the important links in the description below and help us spread the word by sharing! Take care!

The post We Now Know How To Finish The QEG PUBLIC ANNOUNCEMENT appeared first on HopeGirl Blog.

Free Energy Mafia and the Dirty Games They Play.

hopegirl — Mon, 22 Feb 2016 08:32:28 +0000

Free Energy can be a dirty business, and it’s time to clean out the closet! In this show we cover cold fusion, and inventors Pons and Fleishman, Bruce De Palma, and Stanley Meyer. Inventions covered are the N Machine and the E-Cat.

We’ll also discuss the free energy mafia and archetypes, JTRIG Internet Trolling, Top Free Energy Sites, Eugene Mallove, Steven E. Jones, Bearden, Edgar Mitchell, Stephen Greer, Sterling Allan, Mark Dansie and free energy related deaths.

To be covered in our “Dirty Games” Episode of the Peoples Free Energy Show. Airs Live at 9PM GMT /

View Archive Here:

Link to Power Point Presentation for the show:
https://www.hopegirlblog.com/wp-content/uploads/2016/02/Peoples-Free-Energy-Show-Slide-Episode-2-Dirty-Games.pptx

List of Content Included in Slide: (In order)
Free Energy Mafia
Vocabulary: Cold Fusion
Pons & Fleishmann and Cold Fusion
Steve Jones & Cold Fusion
Cold Fusion Summary
Bruce De Palma’s N- Machine
Death of Bruce De Palma
Dr. Eugene Mallove
Stan Meyers Cel
Andrea Rossi E-Cat
E-Cat Cold Fusion & LENR
Deaths Related to Free Energy
Stan Meyers Death
How do we get Access to Free Energy Devices
Dr.Steven Greer and the $100K STAR Challenge
JTRIG
Internet Trolling
Confessions of a Paid Shill
Free Energy Archetypes

Slides from Show:

The post Free Energy Mafia and the Dirty Games They Play. appeared first on HopeGirl Blog.

The History of Free Energy. The Biggest Cover Up of All Time. (Video)

hopegirl — Mon, 15 Feb 2016 16:08:59 +0000

In this show, we’ll start at the beginning and show you the history of free energy and how banking families robbed you of your future and stopped free energy in its tracks 130 years ago. We’ll cover the stories of the Current Wars and Maxwells Theory Redactions. We’ll explain Asymmetrical and Symmetrical Systems and the difference between them. And we’ll compare the laws of physics and laws on nature.

Inventors covered in this episode are Nikola Tesla, Thomas Edison and Michael Faraday.

Free energy politics and business concepts covered in this episode are “Patent Traps”, government funded research, energy education, big oil involvement.

Free energy devices that work covered in this episode; Qmogen (QEG types of devices) and Hatem wheel.

View Archive of Show Here:

Link to the show powerpoint: https://www.hopegirlblog.com/wp-content/uploads/2016/02/Peoples-Free-Energy-Show-Slide-Ep-One-History-is-Written-By-the-Winners.pptx

Peoples Free Energy Show Slide Ep One History is Written By the Winners

List of Content Included in Slide: (In order)

Common Statements About Free Energy
Vocabulary: Efficiency, Overunity, Perpetual Motion, coefficient of performance
Inventors: Michael Faraday, Thomas Edison, Nikola Tesla
Current War
Maxwells Theories Redacted
Laws of Physics Assymetrical Symetrical Systems
Laws of Nature Flight of the Bumblebee
Government Funded Research and Higher Education
MIT VIDEO
The Patent Trap US Patent Office Classification System
Invention Secrecy Order
The Energy Coverup Big Oil Industry
Devices That work: Hatem Magnetic Flywheel, Motor Generator Looping (Qmogens)

Slides from this show:

The post The History of Free Energy. The Biggest Cover Up of All Time. (Video) appeared first on HopeGirl Blog.